| Title | Authors | Source | Date |
|---|---|---|---|
| Rapid Assembly of Small Materials Building Blocks (Voxels) into Large Functional 3D Metamaterials | V. Hahn, P. Kiefer, T. Frenzel, J. Qu, E. Blasco, C. Barner‐Kowollik, and M. Wegener |
Adv. Funct. Mater. 1907795 (2020) |
22.01.2020 |
| Large characteristic lengths in 3D chiral elastic metamaterials | T. Frenzel, V. Hahn, P. Ziemke, J.L.G. Schneider, Y. Chen, P. Kiefer, P. Gumbsch, and M. Wegener |
Commun Mater. 2, 4 (2021) |
4.01.2021 |
| In-situ Quantitative Phase Imaging during Multi-photon Laser Printing | R. Zvagelsky, P. Kiefer, J. Weinacker, and M. Wegener |
ACS Photonics 10, 2901−2908 (2023) |
19.07.2023 |
| Holographic multi-photon 3D laser nanoprinting – at the speed of light: opinion | P. Somers, S. Koch, P. Kiefer, M.L. Meretska, and M. Wegener |
Opt. Mater. Express 14, 2370-2376 (2024) |
17.09.2024 |
| Ultrahigh Specific Strength by Bayesian Optimization of Carbon Nanolattices | P. Serles, J. Yeo, M. Haché, P.G. Demingos, J. Kong, P. Kiefer, S. Dhulipala, B. Kumral, K. Jia, S. Yang, T. Feng, C. Jia, P.M. Ajayan, C.M. Portela, M. Wegener, J. Howe, C.V. Singh, Y. Zou, S. Ryu, and T. Filleter |
Adv. Mater., 2410651 (2025); doi:10.1002/adma.202410651 |
23.01.2025 |
| A multi-photon (7 × 7)-focus 3D laser printer based on a 3D-printed diffractive optical element and a 3D-printed multi-lens array | P. Kiefer, V. Hahn, S. Kalt, Q. Sun, Y.M. Eggeler, and M .Wegener |
Light: Adv. Manufact. 4, 3 (2024) |
6.03.2024 |
| Sensitive Photoresists for Rapid Multiphoton 3D Laser Micro‐ and Nanoprinting | P. Kiefer, V. Hahn, M. Nardi, L. Yang, E. Blasco, C. Barner‐Kowollik, and M. Wegener |
Adv. Opt. Mater. 2000895 (2020) |
26.08.2020 |
| Parallelizing Direct Laser Writing: Multitasking on the Nanoscale. | P. Kiefer, V. Hahn, E. Blasco, and M. Wegener |
In: Cesaria, M., Calà Lesina, A., Collins, J. (eds) Light-Matter Interactions Towards the Nanoscale. NATO Science for Peace and Security Series B: Physics and Biophysics. Springer, Dordrecht. |
26.11.2021 |
| On Iterative Pre-Compensation of 3D Laser-Printed Micro-Optical Components Using Confocal-Optical Microscopy | J. Weinacker, S. Kalt, P. Kiefer, P. Rietz, and M. Wegener |
Adv. Funct. Mater. 2309356 (2023) |
12.12.2023 |
| Two- and three-photon processes during photopolymerization in 3D laser printing | A. Mauri, P. Kiefer, P Neidinger, T. Messer, M. Bojanowski, L. Yang, S. Walden, A. Unterreiner, C. Barner-Kowollik, M. Wegener, W. Wenzel, and M. Kozlowska |
Chem. Sci. 15, 12695–12709 (2024) |
12.07.2024 |
